Project References
48VDC Power System Designed and Manufactured for Sydney Trains
CPS National was contracted by Sydney Trains, a customer of over 20 years, to undertake an end-of-life DC power system replacement at their Penrith exchange. The 48VDC power system required full design and manufacturing [...]
Installation of a Hybrid Solar Power System for Telecommunication Network Tower
CPS National were recently contracted by an Australian telecommunications customer to assist in the installation of a Hybrid Solar Power System to support a recently upgraded telecommunications tower located within the Flinders Ranges. The [...]
Stand-alone power systems tower over costly power lines in remote WA
The future of electricity is being reinvented in Western Australia, where CPS National is working with Horizon Power to replace 54km of transmission with stand-alone power systems (SAPS). In an effort to stay ahead [...]
Breakthrough water solution provides sustainable clean drinking water to remote indigenous community
Today, the remote indigenous community of Gillen Bore in the Northern Territory showcased for the first time how they are accessing safe, sustainable drinking water through an innovative, new water treatment system developed by [...]
Engineer, Procure and Construct of 1.05MW Solar Farm – Onslow Stage Two
Deemed to be one of Australia’s largest and most advanced micro-grid projects, Horizon Power, Western Australia’s main grid operator has bought together a mix of gas-fired power, utility-scale solar and battery storage in the [...]
Remote Renewable Energy Project
CPS National delivered solar systems to SA Water’s Umuwa, Indulkana and Watinuma facilities. Minimise the power operating costs, provide uninterruptible power supply and ensure a minimum 25 year design life. Did we mention 1,300km [...]
Wet Cell Battery Replacement
CPS National was contracted to replace a 34.5 tonne string of hazardous wet cell batteries with new VRLA batteries. The project posed a number of challenges that included logistics, large weights and hazardous substances. [...]
Standalone Hybrid Powered Water Treatment Plant
CPS and project partner, Aurecon, have designed an innovative water treatment plant with standalone hybrid power supply utilising a combination of photovoltaic power generation, diesel backup and battery storage. Designed to meet the demanding [...]
Large Scale Battery Replacement for the Victorian Emergency Services Network
CPS National was contracted to complete a project for the Victorian Emergency Services network to replace batteries at over 100 sites within a 150km radius of Melbourne. In addition, CPS National also conducted battery [...]
Installation of 950VAC Underground Electrical Cable
CPS National was contracted to complete a project for Airservices Australia in Tennant Creek, NT. The project required the installation of two x 1.2km runs of opposite direction 950V AC underground electrical cable from [...]
Identification and Rectification of Potential Telecommunication Network Issues
CPS National were recently contracted to undertake preventative work on a number of sites for an Australian telecommunications provider. Following a failure on a critical interstate site, the customer contracted CPS National to conduct [...]
Design and Manufacture of a Unique DC Power Distribution Solution
CPS National were recently contracted to undertake upgrade works for an Australian telecommunications provider. CPS National were tasked to provide a solution that would facilitate the customer’s additional power usage requirements for an exchange [...]
Upgrading the DC Power Systems Powering Victoria’s Metropolitan Mobile Radio Network
A deal struck between the Victorian Government and Motorola Solutions has begun an upgrade and extension to the Metropolitan Mobile Radio network (MMR). This critical network provides radio voice communications for the Victoria Police, [...]
Auditing, Designing and Upgrading a Remote Solar PV System
The solar off-grid site required extra power resources to power on-site equipment. An initial audit preceded the design, installation and commissioning of the solar PV and battery off-grid system. Adding to the challenge was [...]
Utilising Solar Power to Provide Continuous Power Supply to Remote Communications System
CPS National was contracted by Kordia - Defence to supply materials and installation of solar panels, regulators, batteries, battery enclosures and inverters to two sites at the Bradshaw Defence Training Areas in the Northern [...]
Engineering, Procuring and Constructing the Karratha Airport Solar Farm
CPS National was contracted to engineer, procure and construct a behind the meter, grid tie system with generation management in Karratha, Western Australia. At the time of installation, the Karratha Airport Solar Farm was [...]
Design and Installation of Custom Hybrid Off-grid Solar System
CPS National was contracted to design and construct an 12kWh system which comprised of: 44 x 250W solar panels 2 x Fronius 6kw inverters 2 x Victron inverter/charges FG Wilson generator 2400Ah battery capacity [...]
Upgrade of Existing DC Power Equipment to Include Remote Monitoring Capabilities
CPS National were contracted by Fortescue Metals Group to design and upgrade existing DC power equipment and batteries located within FMG’s remote Radio Base Stations (RBS), ensuring increased system reliability and improved remote monitoring [...]
Power Viability Audit Reporting
CPS National was contracted to provide a Power Viability Audit Report of remote mobile communications facilities to identify and assess: capacity of transformers mains and sub-mains cabling respective protective devices measured loads maximum AC [...]
Design, Installation and Commissioning of 48V DC Power Plant
CPS National were contracted by a major telecommunications company to undertake the design, installation and commissioning of a 50kW 48V DC power plant to support a key strategic telephone exchange site in Woolloongabba, Queensland. [...]