Document Library
Case Study
Capability Statement
Brochure
Non-destructive roof top PV inspections via infrared camera mounted drones to assess the condition of your energy asset. Standard reports for ongoing measurement against baseline. IV curve tracing for actual data.
CPS National was contracted to replace an existing 100kW DC power plant with a 250kW power plant in the same location.
Specialising in critical power systems, remote area power and remote area water. We service the telecommunications, mining, utilities, industrial and commercial industries.
The Gilghi remote water unit uses advance filtering technology and is a breakthrough water solution. With a range of configurations the Gilghi is a simple solution to a variety of applications.
CPS and project partner, Aurecon, have designed an innovative water treatment plant with standalone hybrid power supply utilising a combination of photovoltaic power generation, diesel backup and battery storage.
Design, manufacture and installation of custom critical power infrastructure is essential for applications that require reliable, uninterruptible power.
CPS National was contracted to engineer, procure and construct a stand alone power system for utility provider Horizon Power in Exmouth, Western Australia.
CPS National was contracted to engineer flexible and serviceable 48V DC power systems coupled with separate DC power distribution racks in consultation with a major communications company.
Once installed, a CPS National DC system with UPS is typically performing an operations critical role – a network of CPS service technicians can ensure equipment is fully functional and operating efficiently.
SA Water proposed installing solar systems at its Umuwa UV disinfection facility, Indulkana RO plant site and Watinuma UV treatment hut. CPS National delivered.
Designed for remote applications. Using a combination of solar arrays, battery bank and optional inverter (for AC applications), the Solar Cube can be easily deployed as the complete unit includes concrete footings.
By providing Advanced Analysis and Testing, coupled with Condition and Safety Monitoring, CPS are committed to ensuring your equipment operates as designed, remains in service and is statutory compliant.
Telecommunications equipment typically runs on DC power which means reliability is essential. In addition, much of this equipment requires ‘clean’ DC power that has redundancy so that in an event of incoming AC failure, the equipment will continue to operate.
CPS National was contracted to provide a Power Viability Audit Report of remote mobile communications facilities to identify and assess transformers, cabling, protection devices and maximum power demand.
CPS National was contracted to design, supply, install and maintain a 1.8MWp solar PV system for Ayers Rock Resort in Yulara, NT.
CPS National was contracted to complete a project for the Victorian Emergency Services network to replace batteries at over 100 sites within a 150km radius of Melbourne. Included battery testing and site reporting.
CPS National was contracted to engineer, procure and construct an off grid solar farm in Karratha, Western Australia.
CPS National was contracted to engineer flexible and serviceable 48V DC power systems coupled with separate DC power distribution racks in consultation with a major communications company.
An Uninterruptible Power System (UPS) is typically installed to support critical equipment. Like all equipment, to ensure continuous and reliable performance, it is necessary to perform regular preventative maintenance to identify any issues before they occur.
CPS National was contracted to designed and install a custom hybrid 12kWh off grid solar inverter system for an architecturally designed home in the Adelaide Hills.
Airservices Australia required the installation of two x 1.2km runs of opposite direction 950V AC underground electrical cable from a central MSB to step up and step down transformers.
CPS National was contracted by Kordia – Defence to supply materials and installation of solar panels, regulators, batteries, battery enclosures and inverters to two sites at the Bradshaw Defence Training Areas in the Northern Territory.